- +254-717-828-927
- [email protected]
As long as you choose our JN0-637 exam questions, we are the family. From the time you purchase, use, and pass the exam, we will be with you all the time. You can seek our help on our JN0-637 practice questions anytime, anywhere. As long as you are convenient, you can contact us by email. If you have experienced a very urgent problem while using JN0-637 Exam simulating, you can immediately contact online customer service. And we will solve the problem for you right away.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Our Dumpexams JN0-637 certification exam information is suitable for all IT certification JN0-637 exam. Its usability is fit for various fields of IT. Dumpexams's JN0-637 exam certification training materials is worked out by senior IT specialist team through their own exploration and continuous practice. Its authority is undoubtdul. If there is any quality problem of JN0-637 Exam Dumps and answers you buy or you fail JN0-637 certification exam, we will give full refund unconditionally
NEW QUESTION # 71
Which two statements are correct about automated threat mitigation with Security Director? (Choose two.)
Answer: B,C
Explanation:
Explanation:
NEW QUESTION # 72
You are using trace options to troubleshoot a security policy on your SRX Series device.
Referring to the exhibit, which two statements are true? (Choose two.)
Answer: B,D
NEW QUESTION # 73
You have deployed a new site as shown in the exhibit. Hosts in the 10.10.10.0/24 network must access the DB1 server. The DB1 server must also have internet access the DB1 server encrypted.
Which two configuration statements will be required as part of the configuration on SRX1 to satisfy this requirement? (Choose two)
Answer: B,C
NEW QUESTION # 74
Refer to the Exhibit:
Which two statements about the configuration shown in the exhibit are correct?
Answer: B,C
Explanation:
The two statements about the configuration shown in the exhibit are correct are:
A) The remote IKE gateway IP address is 203.0.113.100. The exhibit shows that the address option under the gateway statement is set to 203.0.113.100, which specifies the IP address of the primary IKE gateway. The address option is used to configure the IP address or the hostname of the remote peer that has a static IP address1.
D) The remote peer is assigned a dynamic IP address. The exhibit shows that the dynamic option under the gateway statement is configured with various attributes, such as general-ikeid, ike-user-type, and user-at-hostname. The dynamic option is used to configure the identifier for the remote gateway with a dynamic IP address. The dynamic option also enables the SRX Series device to accept multiple connections from remote peers that have the same identifier2.
The other statements are incorrect because:
B) The local peer is not assigned a dynamic IP address, but a static IP address. The exhibit shows that the local-address option under the gateway statement is set to 192.0.2.100, which specifies the IP address of the local IKE gateway. The local-address option is used to configure the IP address of the local peer that has a static IP address1.
C) The local IKE gateway IP address is not 203.0.113.100, but 192.0.2.100, as explained above.
Reference: gateway (Security IKE) dynamic (Security IKE)
NEW QUESTION # 75
You are asked to create multiple virtual routers using a single SRX Series device. You must ensure that each virtual router maintains a unique copy of the routing protocol daemon (RPD) process.
Which solution will accomplish this task?
Answer: D
Explanation:
Logical systems on SRX Series devices allow the creation of separate virtual routers, each with its unique RPD process. This segmentation ensures that routing and security policies are isolated across different logical systems, effectively acting like independent routers within a single SRX device. For further information, see Juniper Logical Systems Documentation.
To create multiple virtual routers on a single SRX Series device, each with its own unique copy of the routing protocol daemon (RPD) process, you need to uselogical systems. Logical systems allow for the segmentation of an SRX device into multiple virtual routers, each with independent configurations, including routing instances, policies, and protocol daemons.
* Explanation of Answer D (Logical System):
* Alogical systemon an SRX device enables you to create multiple virtual instances of the SRX, each operating independently with its own control plane and routing processes. Each logical system gets a separate copy of the RPD process, ensuring complete isolation between virtual routers.
* This is the correct solution when you need separate routing instances with their own RPD processes on the same physical device.
Configuration Example:
bash
Copy code
set logical-systems <logical-system-name> interfaces ge-0/0/0 unit 0
set logical-systems <logical-system-name> routing-options static route 0.0.0.0/0 next-hop 192.168.1.1 Juniper Security Reference:
* Logical Systems Overview: Logical systems allow for the creation of multiple virtual instances within a single SRX device, each with its own configuration and control plane. Reference: Juniper Logical Systems Documentation.
NEW QUESTION # 76
......
We have a lasting and sustainable cooperation with customers who are willing to purchase our JN0-637 actual exam. We try our best to renovate and update our JN0-637 study materials in order to help you fill the knowledge gap during your learning process, thus increasing your confidence and success rate. At the same time, JN0-637 Preparation baindumps can keep pace with the digitized world by providing timely application. You will never fell disappointed with our JN0-637 exam quiz.
JN0-637 Practice Test Engine: https://www.dumpexams.com/JN0-637-real-answers.html
© Dynamic Technologies. All rights reserved.
